Examples
Average four points
| Name | IOProc | Planelink | Typelink | Dimlink | Plane | Dim | Type |
| out | n/a | 1 | 1 | 1 | 1 | 1 | char long float32 float64 |
| Name | Type | g/s | Description |
|---|---|---|---|
| mode | int | Boundary handling mode (default = 0 (wrap)) 0 = wrap: Values that exceed the limits are wrapped around to the opposite limit with a modulo operation. (256 wraps to 0, 257 wraps to 1, and -1 wraps to 255, -2 wraps to 254, etc.) 1 = clip: Values are limited not to exceed min or max. (e.g. numbers greater than 255 are set to 255, and numbers less than 0 are set to 0.) 2 = fold: Values that exceed the limits are folded back in the opposite direction. (256 is folded back to 254, 257 is folded back to 253, and -1 is folded back to 1, -2 to 2, etc.) |
|
| x | int | The horizontal distance from each incoming cell to the source cells used for averaging (default = 0) | |
| y | int | The vertical distance from each incoming cell to the source cells used for averaging (default = 0) |
| Name | Description |
|---|---|
| jit.convolve | Convolve two matrices |
| jit.fastblur | Optimized blur/sharpen |
| jit.op | Apply binary or unary operators |