[radiaL] A problem with M-AUDIO U-CONTROL UC-33e

Hello everyone,

I have a simple and very annoying problem with M-AUDIO U-CONTROL UC-33e midi controller in Radial.

Okay - I want to control 8 channels' volume control in Radial with the UC-33e's 8 sliders like a mixer but I only control 1 channel with it and the rest - I can't do.

Well, I will tell you step by step what I am doing so you all don't get confused.

First, I chose UC-33 USB MIDI controller port 1 chan 1 under the midi/control set up in Radial.

Second, I go to Control Map section to open the control panel in Radial. From there, I chose chan_1.mix.gain under the parameter and chose cc and put 7 in the midi cc number section under the controller. Why I chose 7 because on the UC-33e every channel has a slider and three knobs and when I move slider it shows cc 7 - when I tweak the 1st knob, it shows cc 10 - the second knob shows cc 12 - and the third knob shows cc 13. So when I put 7, it communicates with the slider because it is its cc number. So everything is clear I hope until here. (Hopefully) When I move the 1st channel's slider on the UC-33e, the Radial's volume slider also moves up and down - no problem.

Here is the problem comes in...

For the second channel - I don't know what to do. What I mean by that is this...

I go to the chan_2.mix.gain under the parameter and chose cc again and put 7 in the midi cc number section under the controller but this time when I move the second channel's slider on the UC-33e, the second channel's volume slider doesn't move. I know why because I have to change from chan 1 to chan  2 in the MIDI cc section under the midi/control setup. But when I do that (changing from chan 1 to chan 2) this time, on the UC-33e, the first slider doesn't move the first volume slider of the Radial but the second slider of the UC-33e moves both channel 1 and channel 2 volume sliders up and down in Radial. 

On this issue, I don't understand the MIDI cc channels. There must be other solution for this.

Please help me or I am going nuts.

:P

Thank you so much in advance.

snoogy
--
<REALITY.SYS Corrupted - Unable to recover Universe>
It hurts to be on the cutting edge.... |